Kizashi AWD L4-2.4L (2010)
5. Power on the SDT scan tool. With the immobilizer cable connected, the scan tool will automatically start up at the Immobilizer screen.
NOTE:
Once the SDT is powered on, if the screen pictured above is displayed with the immobilizer cable connected, it indicates that the Immobilizer Cable has
not yet been activated to the scan tool. Please call to obtain the activation code for your cable, and refer to TSB number TS 01 12158R for instructions to
setup the Immobilizer Cable.
6. Begin by selecting the "ID Code Reading" option from the Immobilizer screen.
