Kizashi AWD L4-2.4L (2010)
38. Press "Next".
39. Take one of the Keyless Remote Controllers to be registered and hold it up to the Engine Start/Stop button.
40. While holding the remote up to the start switch, press "Next".
41. The screen will change slightly, now displaying "Registering" above the instruction "Hold by applying the remote...", continue holding the remote up
to the Engine Start/Stop button until the screen changes.
42. If there was a problem recognizing a remote controller, an error massage will appear, and it will offer another attempt to register the remote. Again
hold the desired remote up against the Engine Start/Stop button, and press "Next".
NOTE:
