Kizashi AWD L4-2.4L (2010)
9) Remove brake booster from dash panel.
10) Remove accelerator pedal bracket.
11) Remove brake pedal and clutch pedal assembly or brake pedal assembly.
M/T model: Brake pedal and clutch pedal assembly
CVT model: Brake pedal assembly
Installation
Reference: Brake Booster Removal and Installation
1) Install brake pedal and clutch pedal assembly or brake pedal assembly, and install brake booster.
M/T model: Brake pedal and clutch pedal assembly
CVT model: Brake pedal assembly
2) Tighten brake pedal bracket bolts (1) and brake booster nuts (2) to specified torque.
Tightening torque
Brake pedal bracket bolt (a): 13 Nm (1.3 kg-m, 9.5 lbf-ft)
Brake booster nut* (b): 13 Nm (1.3 kg-m, 9.5 lbf-ft)
