Kizashi AWD L4-2.4L (2010)
Brake Caliper: Overhaul
Front Brake Caliper Disassembly and Reassembly
Front Brake Caliper Disassembly and Reassembly
Reference: Front Brake Components
WARNING:
^
Do not place a finger between brake piston and front brake caliper when pushing out brake piston with compressed air.
^
Place shop towel (1) between brake piston and front brake caliper so as not to damage brake piston.
^
Push out brake piston slowly with appropriate air pressure to prevent piston from jumping out.
CAUTION:
Take care not to damage piston and cylinder of front brake caliper.
Disassembly
Caliper
1) Clean around front brake caliper.
2) Remove brake piston by blowing air into flexible hose joint bolt installation hole.
3) Remove cylinder boot (1) from caliper cylinder (3) of front brake caliper using flat-end screwdriver (2) or the like.
