Kizashi AWD L4-2.4L (2010)
Brake Pad: Service and Repair
Front
Front Brake Pad Removal and Installation
Front Brake Pad Removal and Installation
Reference: Front Brake Components
CAUTION:
^
Be careful not to damage brake flexible hoses.
^
Never depress brake pedal during service procedures.
NOTE:
Replace all the front brake pads at the same time even if any brake pad needs to be replaced.
Removal
Reference: Front Brake Pad On-Vehicle Inspection
1) Hoist vehicle and remove front wheel.
2) Remove front brake caliper pin bolts (1).
3) Remove front brake caliper (1) from front brake caliper carrier (2).
NOTE:
^
Hang removed front brake caliper (1) with a wire hook (4) to prevent brake flexible hose from bending, twisting excessively or being pulled.
^
Do not operate brake pedal with brake pads removed.
4) Check for leakage of brake fluid when removing brake pads and repair brake caliper if leakage is found.
5) Remove brake pads (3) and pad springs (5) from front brake caliper carrier (2).
