Kizashi AWD L4-2.4L (2010)
3) Install rear brake caliper and brake pads.
4) Depress brake pedal three times or more with engine running to activate pad clearance adjustment mechanism so that clearance between rear brake
disc and brake pads will be appropriate.
5) Check that brakes are not dragging and that appropriate stopping force can be obtained.
6) Install rear wheel and check if parking brake lever stroke is appropriate and if proper parking braking force can be obtained.
Rear Brake Disc Inspection
Rear Brake Disc Inspection
Reference: Rear Brake Disc Removal and Installation
Measure deflection of rear brake disc at the point 10 mm inside from its edge using special tools and repair or replace the disc if defective.
Rear rear brake disc deflection
Limit: 0.10 mm (0.004 in.)
Special Tool
(A): 09900-20607
(A): 09900-20701