Kizashi AWD L4-2.4L (2010)
Parking Brake Cable: Service and Repair
Parking Brake Cable Removal and Installation
Removal
1) Release parking brake cables from rear brake calipers.
2) Remove console box.
3) Loosen adjusting nut (1).
4) Remove parking brake cables from vehicle.
Installation
Install it by reversing removal procedure, noting the following points.
^
Tighten each bolt to specified torque.
^
Inspect parking brake cable ends are installed to equalizer and levers of rear disc calipers securely.
^
Adjust parking brake cable.
^
After adjusting parking brake lever stroke, make sure that brake system operates properly.
