Kizashi AWD L4-2.4L (2010)
7) Install tensioner pulley and idler pulley.
8) Install cylinder head cover.
9) Install oil pan.
10) Install crankshaft pulley (1) and tighten crankshaft pulley bolt to specified torque. To lock crankshaft pulley, use special tool as shown in figure.
CAUTION:
^
Use special tool to prevent unnecessary load on timing chain, sprockets and any other related parts.
^
Use specified bolts (2) to install special tool to crankshaft pulley. Bolt size: M8
Pitch: 1.25 mm (0.0492 in.)
Length: 25 mm (0.98 in.)
Strength: 7T
Special Tool
(A): 09917-68221
Tightening torque
Crankshaft pulley bolt (a): 150 Nm (15.3 kg-m, 111.0 lbf-ft)