Kizashi AWD L4-2.4L (2010)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Refrigerant Pressure Sensor Removal And Installation
CAUTION: When loosening or tightening a fitting, use two wrenches, one for turning and the other for supporting.
Removal
1. Recover refrigerant from A/C system referring to "Recovery" in Operation Procedure for Refrigerant Charge.
2. Disconnect A/C refrigerant pressure sensor connector (1).
3. Remove A/C refrigerant pressure sensor (3) from liquid pipe (2).
Installation
Reverse removal procedure noting the following points.
-
Apply specified compressor oil to new O-ring.
:
Compressor oil 99000-99022-00E (Compressor oil (DH-PS, 250cc))
-
Tighten A/C refrigerant sensor (1) to specified torque.
