Kizashi AWD L4-2.4L (2010)
Transmission Position Switch/Sensor: Adjustments
Transmission Range Sensor Adjustment
CAUTION:
Do not reuse transmission range sensor.
Reusing of transmission range sensor may affect the performance of CVT system.
1) Disconnect negative (-) cable at battery.
2) Remove air cleaner assembly.
3) Shift select lever to "N" position and loosen transmission range sensor bolts (1).
4) Use special tool to align aligning holes on manual select lever (2) and transmission range sensor (3) as shown in figure.
5) Tighten transmission range sensor bolts to specified torque.
Special Tool
(A): 09916-44310
Tightening torque
Transmission range sensor bolt (a): 5.9 Nm (0.60 kg-m, 4.5 lbf-ft)
