Kizashi AWD L4-2.4L (2010)
Air Bag Control Module: Service and Repair
SDM Removal And Installation
WARNING:
During service procedures, be careful when handling a SDM.
Be sure to read Precautions for Handling and Storage of Air Bag System Components before starting to work and observe every precaution
during work. Neglecting them may result in personal injury, death or inactivation of air bag system when necessary.
Removal
1. Disable air bag system.
2. Remove floor console rear.
3. Turn over floor carpet.
4. Disconnect SDM connector.
5. Remove SDM bolt (2).
6. Remove SDM (1).