Kizashi AWD L4-2.4L (2010)
Control Module: Service and Repair
Transmission Control Module (TCM) Removal and Installation
CAUTION:
^
TCM consists of highly precise parts, therefore when handling it, be careful not to expose to excessive shock.
^
When performing the replacing TCM with used one, all learned controls which are stored in TCM memory should be erased after the
replacement. Neglecting this initialization may cause excessive shift shock.
Removal
1) Disconnect negative (-) cable at battery.
2) Remove driver side instrument panel undercover.
3) Disconnect connectors (2) from TCM (1).
4) Remove TCM by removing nuts (3).
