Kizashi AWD L4-2.4L (2010)
6. Separate banana plug of deployment harness.
CAUTION: Notify all people in immediate area that you intend to deploy air bag (inflator) module or activate seat belt pretensioner.
7. Connect banana plug of deployment harness to battery.
WARNING:
-
Do not place deployed air bag (inflator) module and activated seat belt pretensioner near any flammable objects.
-
Do not apply water, oil, etc. to deployed air bag (inflator) module and activated seat belt pretensioner.
-
Wait for about 30 minutes before touching any metal surface of air bag (inflator) module or seat belt pretensioner.
Deployed Air Bag (Inflator) Module and Activated Seat Belt Pretensioner Disposal
Deployed Air Bag (inflator) Module And Activated Seat Belt Pretensioner Disposal
WARNING: Failure to follow proper air bag (inflator) module and seat belt pretensioner disposal procedures can result in air bag deployment
and pretensioner activation which may cause personal injury. Undeployed air bag (inflator) module and inactivated seat belt pretensioner must
not be disposed of through normal refuse channels. Undeployed air bag (inflator) module and inactivated seat belt pretensioner contains
substances that can cause severe illness or personal injury if sealed container is damaged during disposal.
Deployed air bag (inflator) module and activated seat belt pretensioner can be disposed of in the same way which is used for disposal of any other parts.
For their disposal, however, the following points should be noted.
-
Immediately after deployment / activation air bag (inflator) module and seat belt pretensioner are hot. Wait for 30 minutes to cool it off before
handling it.
-
Never apply water and oil etc. to deployed air bag (inflator) module and activated seat belt pretensioner to cool them off. Do not get on deployed
air bag (inflator) module and activated seat belt pretensioner.
