Kizashi AWD L4-2.4L (2010)
WARNING: When handling an air bag (inflator) module, be sure to read Precautions for Handling and Storage of Air Bag System
Components and observe each instruction. Failure to follow them could cause damage to air bag (inflator) module or result in personal injury.
NOTE: Refer to Repair and Inspection Required after Accident before replacing a deployed air bag.
Removal
1. Disable air bag system.
2. Disconnect front side air bag harness connector (1).
3. Remove fitting item (1) at bottom part of backboard (2) and turn over bottom part of backboard.
4. Remove screws (3) and remove backboard.
