Kizashi AWD L4-2.4L (2010)
Air Bag: Testing and Inspection
Rear Side Air Bag (Inflator) Module Inspection
Rear Side Air Bag (inflator) Module Inspection
WARNING:
-
Never measure resistance of air bag (inflator) module. Current of tester can deploy air bag.
-
Never repair or disassemble air bag (inflator) module.
Check air bag (inflator) module and if any of the following is found, replace air bag (inflator) module with new one.
-
Air bag being deployed.
-
Air bag (inflator) module is damaged or a strong impact was applied to it.
-
Connector being damaged.
-
Bend or deformity of air bag (inflator) module bracket.
