Kizashi AWD L4-2.4L (2010)
Interlocked operation of rain-sensing wiper and auto-on headlight functions
a. Set AUTO knob to position "2", and then change wiper and washer switch position from OFF to AUTO.
b. Headlights flash in pattern of current setting.
c. Select desired setting referring to the following table.
d. Headlights flash in pattern of new setting.
5. Check new setting referring to headlight flashing patterns in table of Step 4.
NOTE: Lighting or flashing of headlights will start about 5 seconds after setting change has been completed.
6. After completion of setting change, push engine switch to change ignition mode of keyless push start system to "OFF" or run the vehicle.
