Kizashi AWD L4-2.4L (2010)
5. Place battery (lithium disc-type CR 2032 or equivalent) (1) so its "-" terminal faces "-" mark of the printed circuit board (2).
6. Install printed circuit board to lower case and then fit upper case securely.
NOTE: Dispose of the used battery properly according to applicable rules or regulations. Do not dispose of lithium batteries with ordinary
household trash.
Precautions For Replacing Remote Controller
Precautions for Replacing Remote Controller
Remote controller incorporates the transponder. Therefore, register the transponder code when remote controller is replaced or added.
