Kizashi AWD L4-2.4L (2010)
Installation
Reference: Front Strut Assembly Inspection
CAUTION:
Strut bracket nuts are pre-coated with friction stabilizer. Never reuse removed nuts, otherwise nuts may loosen.
Reverse removal procedure, noting the following points.
^
Insert bolts from front of vehicle.
^
Tighten all fasteners to specified torque.
Tightening torque
Strut bracket nut (a): 120 Nm (12.2 kg-m, 88.5 lbf-ft)
Brake hose bolt (c): 26 Nm (2.7 kg-m, 19.5 lbf-ft)
Stabilizer bar joint nut (d): 55 Nm (5.6 kg-m, 40.5 lbf-ft)
CAUTION:
Do not twist brake hose and wheel speed sensor harness when installing them.
^
Lower hoist and, without loading anything in vehicle, tighten strut support nuts using special tool to specified torque.
Special Tool
(A): 09945-25710
Tightening torque
Strut support nut (b): 50 Nm (5.1 kg-m, 37.0 lbf-ft)
CAUTION:
