Kizashi AWD L4-2.4L (2010)
Seals and Gaskets: Service and Repair
Input Shaft Oil Seal Replacement
Input Shaft Oil Seal Replacement
CAUTION:
Be careful to handle aluminum parts so as not to damage them.
NOTE:
^
Thoroughly clean CVT assembly exterior before servicing it.
^
Keep working table, tools and hands clean while servicing.
^
Do not expose removed parts to dust. Keep them always clean.
1) Dismount CVT assembly.
2) Remove torque converter (1) from CVT assembly.
3) Remove input shaft oil seal (1) by using flat-end screwdriver or the like (2).
CAUTION:
When removing oil seal, be careful not to scratch the oil seal press-fit part of transaxle housing. Otherwise CVT fluid may cause
leakage.