Kizashi AWD L4-2.4L (2010)
8) Check that manual select lever is "N" range, referring to Step 4) of Transmission Range Sensor Inspection. See: Sensors and Switches -
A/T/Transmission Position Switch/Sensor/Testing and Inspection
9) Apply grease to select lever pin (1), and then install adjuster case (2) into select lever pin securely.
"A": Grease 99000-25011 (SUZUKI Super Grease A)
10) Push lock piece (3) in arrow direction [a] as shown in figure.
11) Slide lock plate (4) in arrow direction [b] as shown in figure, until it gets over the claw (5).
