Kizashi AWD L4-2.4L (2010)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Removal and Installation
Removal
1) Clean around brake master cylinder reservoir cap and extract fluid with syringe or the like from brake master cylinder reservoir.
2) Disconnect clutch fluid pipe (4) from clutch master cylinder (1).
3) Disconnect clutch reservoir hose (2).
4) Remove push rod from clutch pedal, and then remove clutch master cylinder.
Installation
Reverse removal procedure noting the following points.
^
Apply grease to push rod tip.
"A": Grease 99000-25100 (SUZUKI Silicone Grease)