Kizashi AWD L4-2.4L (2010)
Installation
1) Install clutch operating cylinder assembly (2) to transaxle. Tighten new mounting bolts to specified torque.
Tightening torque
Clutch operating cylinder assembly mounting bolt (a): 10 Nm (1.0 kg-m, 7.5 lbf-ft)
2) Connect clutch fluid pipe (4) to clutch operating cylinder assembly temporarily.
3) Install clutch pipe joint sleeve (3) to transaxle securely and then tighten clutch fluid pipe flare nut (1) to specified torque.
Tightening torque
Clutch fluid pipe flare nut (b): 16 Nm (1.6 kg-m, 12.0 lbf-ft)