Kizashi AWD L4-2.4L (2010)
4) Drive vehicle so that CVT fluid temperature reaches normal operating temperature (70 - 80° C (158 - 176° F)).
NOTE:
Engine coolant temperature rises when racing engine at "P" or "N" range. But CVT fluid temperature does not rise at "P" or "N" range. Be
sure to drive vehicle in order to rise CVT fluid temperature.
5) Stop vehicle with engine running and place it horizontally.
6) With select lever at "P" range, apply parking brake and block wheels.
7) Keep engine idling, depress brake pedal fully and shift select lever slowly to "D" and back to "P" position.
8) With engine idling and A/C switch turned off, pull out fluid level gauge (1), wipe it off with lint-free paper towel and put it back into place.
9) Pull out fluid level gauge (1) again and check CVT fluid level indicated on it. Lowest fluid level should be between full hot (2) and low hot (3). If
it is below low hot, add specified CVT fluid up to full hot.
CVT fluid specification
: SUZUKI CVT FLUID GREEN 1 or Shell GREEN-1 V
NOTE:
^
Do not race engine while checking fluid level, even after engine start.
^
Although fluid level can be checked temporarily at room (cold) temperature of 20 - 30° C (68 - 86° F), this level check is considered to be
preparation before performing level check under normal operating (hot) temperature.
