Kizashi AWD L4-2.4L (2010)
Fluid - CVT: Service and Repair
CVT Fluid Change
CVT Fluid Change
CAUTION:
^
Do not use any fluid other than specified CVT fluid. Use of any fluid other than specified CVT fluid may cause juddering or some
other faulty condition to occur.
^
Do not overfill. Overfilling can cause foaming and loss of fluid through breather.
Then slippage and transaxle failure can result.
^
After changing CVT fluid, check drain plug for CVT fluid leakage.
^
Do not change or drain CVT fluid before each test.
NOTE:
CVT fluid does not drain completely.
1) Hoist vehicle.
2) Remove left side engine undercover.
3) When engine is cool, remove CVT fluid drain plug (1) from CVT oil pan (2) and drain CVT fluid.
4) Install CVT fluid drain plug (1) with new gasket and then tighten it to specified torque.
Tightening torque
CVT fluid drain plug (a): 34 Nm (3.5 kg-m, 25.0 lbf-ft)
5) Lower vehicle and replenish proper amount of specified CVT fluid from fluid filler tube (2).
CVT fluid specification
: SUZUKI CVT FLUID GREEN 1 or Shell GREEN-1 V
CVT fluid capacity
