Kizashi AWD L4-2.4L (2010)
Axle Shaft Assembly: Overhaul
Front
Front Drive Shaft Disassembly and Reassembly
Reference: Front Drive Shaft Components: Front
Reference: Front Drive Shaft Assembly Removal and Installation: Front
Disassembly
CAUTION:
^
Disassembly of wheel side joint is not allowed. Replace drive shaft assembly if noise or damage exists in it.
^
Do not disassemble tripod joint. Replace drive shaft assembly if any faulty conditions are found in it.
1) Remove boot bands (1) of differential side.
2) Remove differential side joint housing from tripod joint.
3) Wipe off grease from shaft and use snap ring pliers (2) to take off snap ring (1).