Kizashi AWD L4-2.4L (2010)
Flywheel: Service and Repair
Flywheel / Drive Plate Removal and Installation
Flywheel / Drive Plate Removal and Installation
Removal
1) Remove transmission assembly.
^
M/T model:
^
CVT model:
2) Wedge a special tool in ring gear teeth to lock flywheel or drive plate as shown in figure.
Special Tool
(A): 09924-17811
3) Remove flywheel or drive plate from engine assembly.
Installation
Reverse removal procedure noting the following points:
^
Install new flywheel bolts or drive plate bolts.
^
Wedge a special tool in ring gear teeth to lock flywheel or drive plate as shown in figure.
Special Tool
(A): 09924-17811
^
Tighten flywheel bolts or drive plate bolts to specified torque.
Tightening torque
