Kizashi AWD L4-2.4L (2010)
Removal
1. Clean inside, outside and around glass.
2. Remove wiper arms.
3. Remove cowl top garnish.
4. Using masking tape, cover body surface around glass to prevent any damage when cutting the adhesive.
5. Remove rear view mirror.
6. Remove rain / light sensor bracket.
7. Remove instrument panel, if necessary.
8. Remove roof lining, if necessary.
9. Remove or cut windshield molding.
10. Make hole into adhesive with eyeleteer (1) and pass piano string through it.
11. Cut all adhesives of windshield (1) with piano string (2).
CAUTION: Do not damage windshield when using windshield knife (3) to cut adhesive.