Kizashi AWD L4-2.4L (2010)
3. Check that clearance lights flash at 1-second interval.
Repeat procedure beginning with Step 1 if clearance lights do not flash.
NOTE: If clearance lights operate repeating a 3-second on, 1-second off cycle, rain / light sensor may be abnormal. Perform diagnosis in this
case.
4. Select desired setting item from the following table. Then proceed to setting change mode for selected item according to corresponding procedure
described below.
NOTE: On proceeding to setting change mode for selected setting item, headlights flash in pattern specific to current setting. Confirm current
setting referring to the following table before starting setting change operation.
