Reno L4-2.0L (2006)
Antenna Control Module: Service and Repair
Glass Antenna Module Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the C-pillar trim panel. Refer to C-pillar Trim Panel Removal and Installation.
3. Disconnect the electrical connector.
4. Remove the screws and the glass antenna module.
Installation
1. Install the glass antenna module with the screws.
2. Connect the electrical connectors.
3. Install the C-piller trim panel. Refer to C-pillar Trim Panel Removal and Installation.
4. Connect the negative battery cable.
