Reno L4-2.0L (2006)
5. Disconnect the electrical connectors.
6. Remove the door trim panel screws.
7. Pry off the trim panel using the trim remover KM-475-B.
8. Disconnect the status display connector.
Installation
1. Connect the status display connector.
2. Install the trim panel.
3. Connect the electrical connectors.
4. Install the rear deck lid remote switch and the power window/mirror control switch.
5. Install the door trim panel screws.
Tighten:
Tighten the door trim panel screws to 2.5 Nm (22 in. lbs.).
6. Install the front door escutcheon.
7. Install the window frame inner cover.