Reno L4-2.0L (2006)
10. Reposition the floor carpet on the left side of the vehicle.
11. Remove the cable.
Installation
1. Feed the cable from the luggage compartment to the passenger compartment.
2. Install the floor carpet to its original position.
3. Install the left side front and rear rocker panels, the left side kick panel, and the left side lower B-pillar trim panel.
4. Install the driver's side seat and the rear seats.
5. Connect the cable to the handle.
6. Install the fuel filler door remote cable handle with the screws.
Tighten:
Tighten the fuel filler door remote cable handle screws to 10 Nm (89 in. lbs.).
7. Install the fuel filler door remote cable handle cover with the screw.
Tighten:
Tighten the fuel filler door remote cable handle cover screw to 3 Nm (27 in. lbs.).