Reno L4-2.0L (2006)
Sunroof / Moonroof Switch: Service and Repair
Power Sunroof Control Switch Removal And Installation
Removal
1. Disconnect the negative battery cable.
2. Pry off the interior courtesy lamp lens.
3. Remove the screws and the switch.
4. Disconnect the electrical connector.
Installation
1. Connect the electrical connector.
2. Install the sunroof control switch with the screws.
Tighten:
Tighten the power sunroof control switch screws to 2 Nm (18 in. lbs.).
3. Install the interior courtesy lamp lens.
4. Connect the negative battery cable.
