Reno L4-2.0L (2006)
1. Install the caliper with the mounting bolts.
Tighten: Tighten the caliper mounting bolts to 56 Nm (41 ft. lbs.).
2. Connect the brake hose with the bolt and ring seals.
Tighten: Tighten the brake hose inlet bolt and ring seals to 32 Nm (24 ft. lbs.).
3. Install the rear wheels.
4. Lower the vehicle.
5. Fill the master cylinder to the proper level with clean brake fluid.
6. Bleed the caliper.
