Reno L4-2.0L (2006)
CAUTION: Remove the reservoir only when replacing a damaged or a leaking reservoir.
1. Disconnect the electrical connector from the reservoir.
2. For vehicles with the manual transaxle, disconnect the clip to the clutch hose connection to the master cylinder, and move the clip out of the way.
3. Remove the clutch hose from the master cylinder.
4. Gently pry upwards with a screwdriver to release the reservoir.
5. Tilt the reservoir and pull it upward in order to remove it.
6. Remove the reservoir seals from the master cylinder body.
Installation
1. Lubricate the new seals with clean brake fluid. Install the seals into the cylinder body.
