Reno L4-2.0L (2006)
Camshaft Gear/Sprocket: Service and Repair
Camshaft Gears Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the timing belt.
3. Remove the spark plug cover bolts.
4. Remove the spark plug cover.
5. Disconnect the ignition wires from the spark plugs.
6. Disconnect the breather tubes from the camshaft cover.
7. Remove the camshaft cover bolts.
8. Remove the camshaft cover washers.
9. Remove the camshaft cover and the camshaft cover gasket.
10. While holding the intake camshaft firmly in place, remove the intake camshaft gear bolt.
11. Remove the intake camshaft gear.
12. Remove the Camshaft Position (CMP) sensor.
13. Remove the water pump.
14. While holding the exhaust camshaft firmly in place, remove the exhaust camshaft gear bolt.
15. Remove the exhaust camshaft gear.
Installation