Reno L4-2.0L (2006)
15. Install the fuel rail assembly.
16. Install the exhaust flex pipe retaining nuts at the exhaust manifold studs.
Tighten: Tighten the exhaust flex pipe-to-exhaust manifold retaining nuts to 35 Nm (26 ft. lbs.).
17. Install the rear timing belt cover.
18. Install the rear timing belt cover bolts.
Tighten: Tighten the rear timing belt cover bolts to 7 Nm (62 inch lbs.).
19. Install the engine mount and the retaining bolts.
Tighten: Tighten the engine mount retaining bolts to 45 Nm (33 ft. lbs.).
20. Install the Camshaft Position (CMP) sensor.
21. Install the crankshaft gear.
22. Install the water pump.
23. Install the timing belt automatic tensioner.
24. Install the timing belt automatic tensioner bolt.
Tighten: Tighten the timing belt automatic tensioner bolts to 25 Nm (18 ft. lbs.).
25. Install the timing belt idler pulleys.
26. Install the timing belt idler pulley bolt and nut.
Tighten: Tighten the timing belt idler pulley bolt to 25 Nm (18 ft. lbs.).
27. Install the camshaft gears with the timing marks at the front.
