Reno L4-2.0L (2006)
4. Remove the air cleaner assembly by removing the two bolts and loosening the outlet hose clamp indicated in the illustration. Slip the outlet hose off
of the air cleaner then lift the air cleaner out of the engine compartment.
5. Support the engine with the Engine Assembly Support Fixture DW1 10-060 and X-28467-560 Engine Assembly Support Channel or an equivalent
engine support assembly
6. Remove the engine mount bracket nut on the frame side first. Then raise the engine until the bracket starts to rise. You will see the stud retract into
the bracket.
7. Remove the remaining two nuts and bolt from the engine side, and remove the bracket.
8. Use a l5mm wrench to turn the tensioner bolt clockwise, releasing the tension on the serpentine accessory drive belt. Remove the belt.