Reno L4-2.0L (2006)
CAUTION:
Do not allow the heat gun shield to contact any of the plastic or foam in the dash area you are working in.
14.
When the solder has melted you will see the centering ribs on one side of the crimp connector and the glue should start coming out around the
wires.
15.
Temporarily connect the three instrument cluster connectors to the instrument cluster. Connect the battery negative terminal and test the headlight
operation. The key must be in the ON position for the headlights to operate. If the headlights do not operate further circuit diagnosis will be
required. Please contact the Suzuki Techline if assistance is required. If headlights operate, continue to step 16.
16.
Turn ignition OFF Disconnect battery negative cable. Remove instrument cluster.
