Reno L4-2.0L (2006)
Horizontal (Left/Right) Aiming Procedures
1. Turn ON the low beam headlamps and mark horizontal line & vertical line around high intensity zone as figure. This line is called "Cut Off Line".
2. Detach horizontal aiming hold cap to be placed outside of a headlamps.
3. Adjust the horizontal aiming driver with a "+" screw driver so that LINE B (vertical line of cut off line) shall be placed within 100 mm (4 in.)
right and left from the vertical axis of HV point.
4. Close the hood carefully and verify that the hood is securely closed.