Reno L4-2.0L (2006)
Power Steering Line/Hose: Service and Repair
Hydraulic Cylinder Lines Removal and Installation
Hydraulic Cylinder Lines Removal and Installation
Removal
1. Siphon the power steering fluid from the fluid reservoir.
2. Raise and suitably support the vehicle.
3. Disconnect the power steering gear hydraulic cylinder pipes from the power steering gear at the valve end. Replace the O-ring seals as needed.
4. Disconnect the power steering gear hydraulic cylinder pipes from the power steering gear at the cylinder end.
5. Remove the steering gear hydraulic cylinder pipes from the vehicle.