Reno L4-2.0L (2006)
Throttle Position Sensor: Description and Operation
Throttle Position Sensor Description
The Throttle Position (TP) sensor is a potentiometer connected to the throttle shaft of the throttle body. The TP sensor electrical circuit consists of a 5
volt supply line and a ground line, both provided by the engine control module (ECM). The ECM calculates the throttle position by monitoring the
voltage on this signal line. The TP sensor output changes as the accelerator pedal is moved, changing the throttle valve angle. At a closed throttle
position, the output of the TP sensor is low, about 0.5 volt. As the throttle valve opens, the output increases so that, at Wide Open Throttle (WOT), the
output voltage will be about 5 volts.
The ECM can determine fuel delivery based on throttle valve angle (driver demand). A broken or loose TP sensor can cause intermittent bursts of fuel
from the injector and an unstable idle, because the ECM thinks the throttle is moving. A problem in any of the TP sensor circuits should set a diagnostic
trouble code (DTC) P0121 or P0122. Once the DTC is set, the ECM will substitute a default value for the TP sensor and some vehicle performance will
return. A DTC P0121 will cause a high idle speed.
