Reno L4-2.0L (2006)
6. Install the fuel rail retaining bolts. Tighten:
Tighten the fuel rail retaining bolts to 25 Nm (18 ft. lbs.).
7. Connect the fuel feed line to the fuel rail.
8. Connect the fuel injector connectors. Rotate each fuel injector as required.
9. Connect the PCV hose to the valve cover.
10. Connect the breather hose to the valve cover.
11. Connect the IAT sensor connector.
12. Connect the negative battery cable.
13. Perform a leak check of the fuel rail and fuel injectors.
