Reno L4-2.0L (2006)
Ignition Switch Lock Cylinder: Technical Service Bulletins
Ignition - Key Will Not Come Out of Ignition Switch
FORENZA
Section Title: Transmission
TSB No.TS04 12056
Division: Automotive
Category: Technical
SUBJECT:
IGNITION KEY WILL NOT COME OUT OF IGNITION SWITCH
MODEL(S):
FORENZA SEDAN/WAGON, RENO (RQ420)
YEAR:
ALL
CONDITION:
When attempting to remove the ignition key from the ignition switch tumbler, the key will not turn to return the ignition switch to the locked position to
allow key removal.
CAUSE:
The park switch in the gear selector control lever may have a broken anchoring tab causing the switch contact to stay open. This open circuit prevents the
ignition tumbler solenoid from allowing the tumbler to rotate to the locked position to allow for ignition key removal.
CORRECTION:
Inspect the park position switch located in the selector control lever assembly for looseness. See instructions below. Replace the Selector Lever Solenoid
Assembly (28610-85z00) if the park switch has come out of its designated location.
PART(S) INFORMATION:
WARRANTY CLAIM INFORMATION
Inspection and Replacement:
