Reno L4-2.0L (2006)
4.
With the gear selector still in the "L" position, lift the front center console up and toward the rear of the vehicle.
5.
Continue to lift the console while maneuvering it around the shifter and parking brake levers.
6.
Move the front center console aside. It is not necessary to disconnect the electrical connector.
7.
Pull gently on the park position switch wires indicated. If the switch easily comes out, continue to step 8 to replace the selector lever solenoid
assembly. If the switch does not come out, this repair procedure does not apply. Further diagnosis of the system is required.