Reno L4-2.0L (2006)
NOTE:
Certain vehicles produced before December; 2005 have buckles with a smaller mounting hole which use the bolt and a steel lock washer shown in
figure 1. That bolt and steel lock washer MUST NOT be re-used for the new buckle installation.
The CORRECT hardware shown in figure 2 must be used.
WARRANTY:
Please refer to the Campaign Bulletin SC-39 for claim submission instructions and labor times.
PART(S) INFORMATION:
Replacement Procedure:
1.
Park the vehicle in an area where all of the doors can be opened and set the parking brake. Slide both front seats all the way forward.