Reno L4-2.0L (2006)
Cruise Control Switch: Description and Operation
Cruise Control Switch Description
After the main switch is turned ON and the neutral position of the switch is detected by the cruise control actuator, the following operations can be
performed by using the cruise control switch:
Set
To engage the cruise control system, turn the cruise control system ON by pressing the cruise ON/OFF button ON and momentarily press the set/coast
button when the minimum speed is 39 km/h (24 mph). The ECM will confirm that the cruise control criteria has been met. The ECM will record the
vehicle speed and illuminate the cruise indicator. Pressing the accelerator pedal, while the cruise control system is engaged, will allow the driver to
override the cruise control system in order to accelerate the vehicle beyond the current set vehicle speed. When the accelerator pedal is released, the
vehicle will decelerate and resume the current set vehicle speed.
Coast
If the cruise control is turned OFF with the main switch, all cruise control functions are stopped. When the cruise control or ignition is turned OFF, the
cruise control set speed memory is erased.
Resume
If the cruise control is ON, and the system was disengaged by using the brake or clutch, exceeding the Maximum speed, failing to maintain the minimum
speed, the last memorized speed can be reset by selecting the RESUME/ACC button. Momentarily activating the RESUME/ACC button, after the cruise
control system has been disengaged by pressing the brake pedal, will recall the previous set vehicle speed that is recorded in the ECM. If the cruise
control is turned OFF with the main switch, all cruise control functions are stopped. When the cruise control or ignition is turned OFF, the cruise control
set speed memory is erased.
Accelerate
Activating and holding the RESUME/ACC button, when the cruise control system is engaged, will allow the vehicle to accelerate to a greater vehicle
speed than the current set vehicle speed. When the RESUME/ACC button is released, the ECM will record the vehicle speed and maintain the vehicle
speed as the new set vehicle speed. When the cruise control system is engaged, momentarily activating the RESUME/ACC button will allow the vehicle
to accelerate at 1.6 km/h (1 mph) increments for each time that the RESUME/ACC button is momentarily activated.
