Reno L4-2.0L (2006)
35.
Loosely install the valve body to the transmission case using the 7 bolts.
Note:
Make sure that the solenoid wire harness is not pinched between the transmission case and the top or bottom of the valve body.
36.
Connect the manual shift shaft, located on the valve body, to the range selector lever.
37.
Tighten the valve body mounting bolts, working from the center outward.
Torque to 8 Nm (71 lbs-in)
38.
Install the input speed sensor.
Torque to 8 Nm (71 lbs-in)
