Reno L4-2.0L (2006)
Shift Interlock: Service and Repair
Shift Control Lever Assembly Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the floor console.
3. Disconnect the electrical switch connectors.
4. Remove the shift control cable adjuster pinch nut.
5. Remove the cable from the bracket.
6. Remove the bolts and nuts holding the shift control assembly to the floor panel.
7. Remove the shift control assembly.
Installation
1. Install the shift control assembly.
Tighten:
Tighten the shift control assembly mounting bolts and nuts to 8 Nm (71 inch lbs.).