Samurai 2WD L4-1324cc 1.3L SOHC 5 Carb 8V (1987)
Idle Speed: Adjustments
Curb Idle Speed
1.
Ensure that ignition timing and valve lash are properly adjusted, all vacuum hoses and engine harness connectors are securely connected and all
accessories are off.
2.
Connect suitable tachometer to engine following manufacturer's instructions.
3.
Start engine and run until it reaches normal operating temperature.
4.
If idle speed is not within specifications, adjust by turning throttle stop screw in or out as needed.
5.
When idle speed has been adjusted to specifications, check operation of idle up compensator and adjust as needed.
