Samurai 2WD L4-1324cc 1.3L SOHC 5 Carb 8V (1987)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Leaf Spring
Fig. 1 Exploded view of front suspension & axle assembly
1.
Raise and support vehicle, then position suitable jackstands under axle housing.
2.
Remove wheel assembly.
3.
Remove stabilizer nut and bolt.
4.
Remove U-bolt attaching bolts, then U-bolt.
5.
Remove shackle nuts, then leaf spring nuts, Fig. 1.
6.
Pull out leaf spring bolt, then shackle pin and remove leaf spring.
7.
Reverse procedure to install. Torque U-bolt nuts to 43.5-57.5 ft. lbs., shackle pin nut to 22-39.5 ft. lbs., stabilizer bolt to 51-65 ft. lbs. and leaf
spring nut to 33-50.5 ft. lbs.